Resin-SZUV-S9006-high tenacity
Gabatarwar Kayan Buga na 3D
Halaye
Saukewa: SZUV-S9006?
BAYANIN KYAUTATA
SZUV-S9006 shine ABS kamar resin SL wanda ke dahigh-taurifasali. An ?era shi don firintocin SLA masu ?arfi. Ana iya amfani da SZUV-S9006 a cikin ?irar ?ira, ?irar ra'ayi, sassan taro da samfuran aiki a fagen masana'antar kera motoci, likitanci da masana'antar lantarki. Ginin dorewar sassan da SZUV-S9006 ya wuce watanni 6.5.
?
MALALASIFFOFI
-Matsakaicin danko mai ruwa, mai sau?in sakewa, mai sau?in tsaftace sassa da injuna
-Ingantacciyar ?arfin ri?ewa, ingantaccen girman ri?e sassa a cikin yanayin ?an?ano
-bu?atar ?arancin ?arewar sashi
- Tsawon rayuwa a cikin injin
-?anananraguwar ?asa?
?
MALALAAMFANIN
- Bukatar ?arancin lokacin ?arewa, sau?in warkewa
-Bulid daidai kuma manyan sassa masu tauri tare da ingantacciyar kwanciyar hankali
-Ma?aukaki masu inganci don ?angarori na simintin ?arfe
-?ananan raguwa da kyakkyawan juriya ga rawaya
-Mai girma farin launi
-Fitaccen machinable kayan SLA?
Lura: zafin jiki na szuv-s9006 bai kamata ya yi girma ba. Da fatan za a yi amfani da shi ?asa da 25 ℃. Dangin dangi don amfani da ajiya dole ne ya kasance ?asa da 38RH%.
?
Abubuwan Aikace-aikace
WASU DAGA CIKIN AYYUKA NA
Ilimi
Hannun Molds
Sassan Motoci
Marufi Design
Zane-zane
Likita
?
?Abubuwan Jiki (Liquid)
| Bayyanar | Fari |
| Yawan yawa | 1.11-~ 1.15g/cm3@ 25 ℃ |
| Dankowar jiki | 230 ~ 290cps @ 26 ℃ |
| Dp | 0.13 ~ 0.145 mm |
| Ec | 9.5 ~ 10.5 mJ/cm2 |
| Gine-gine kauri | 0.05 ~ 0.12mm |
?
Kayayyakin Injini (Bayan-Cured)
| AUNA? | HANYAR GWADA? | DARAJA |
| 90-minti UV bayan magani | ||
| Hardness, Shore D | Saukewa: ASTM D2240 | 75-85 |
| Modules mai sassauci, Mpa | Saukewa: ASTM D790 | 2,592-2,675 |
| ?arfin sassau?a, Mpa | Saukewa: ASTM D790 | 63-70 |
| Modules tensile, MPa | Saukewa: ASTM D638 | 2,489-2,595 |
| ?arfin ?aure, MPa | Saukewa: ASTM D638 | 36-53 |
| Tsawaitawa a lokacin hutu | Saukewa: ASTM D638 | 15-25% |
| Rabon Poisson | Saukewa: ASTM D638 | 0.4-0.44 |
| ?arfin tasirin Izod, J/m | Bayani na ASTM D256 | 45-70 |
| Zafin karkatar da zafi, ℃ | ASTM D 648 @ 66PSI | 38-50 |
| Canjin Gilashi, Tg | DMA, E” kololuwa | 40-54 |
| Coefficient na thermal kashe kudi | TMA (T | 90-102*E-6 |
| Yawan yawa, g/cm3 | ? | 1.12-1.18 |
| Dielectric Constant 60 Hz | Saukewa: ASTM D150-98 | 4.2-5.0 |
| Dielectric Constant 1 kHz | Saukewa: ASTM D150-98 | 3.3-4.2 |
| Dielectric Constant 1 MHz | Saukewa: ASTM D150-98 | 3.2-4.0 |
| ?arfin DielectricV/mm | Saukewa: ASTM D1549-97A | 12.8-16.1 |
?
